Gorilla sealants come in more than one form to help protect the surface of your project from damage caused by water, dust, insects, and much more. 

Gorilla Sealants come in a variety of forms, including:

• Paste 
• Spray 
• Tape 
• Liquid 
• Silicones 

When it comes to fillers, Gorilla offers two types of fillers:

• For wall repairs
• Wood fillers 

Each of these types of products has its specific use. So let’s dive in and discover the main features of each type of sealant and filler, what they are best used for, and how to properly apply them for the best results.

Gorilla Glue Sealants: What They Are and How To Use Them 

Maybe you are familiar with sealants or are learning about them now. Sealants help protect a surface. They prevent water or other fluids and substances from passing through and damaging the material. 

Gorilla Glue is known for its quality and long-lasting, durable, and efficient products. 

So let’s have a look at their different types of sealants. 

Gorilla Sealant Paste

Gorilla sealant paste is waterproof and made to seal and patch up cracks and holes, leaving a smooth cover on the surface after application. 

Main features:

• High strength formula 
• Flexible rubberized paste 
• Instant bond 
• Works on multiple surfaces 
• Spreadable to fill large gaps 
• Stops and prevents leaks 
• Paintable 
• Shrink resistant 
• Mildew resistant 
• Sandable 
• Outdoor application 
• White or black cured color 

Gorilla Sealant Paste can seal out:

• Air
• Water
• Moisture 

How to apply Gorilla Sealant Paste:

1. Clean the surface thoroughly – remove any grease or oil stains, dust, dirt, or any other stains 
2. Apply the sealant paste to the surface – you can use a trowel or a putty knife 
3. Apply a layer of sealant to each gap or hole 
4. Allow the sealant to cure before applying another coat 
5. The sealant will start drying after about 20 to 30 minutes of application
6. It needs 24 to 48 hours to fully cure 

How to store Gorilla Sealant Paste:

• After use, place the lid back on
• Lightly tap on it to create a tight seal 
• Store in a dry place at room temperature 

Note: you can wipe away any excess sealant paste with a dry cloth before it starts to dry. 

Gorilla Glue Sealant Tape

Gorilla Waterproof Patch and Seal Tape has three color variations: clear, white, and black. You can patch cracks, holes, gaps, or tears underwater. 

Main features:

• A very thick adhesive layer
• UV resistant backing 
• Permanent bond
• Waterproof 
• Indoor and outdoor application 
• 4” wide 
• Non-yellowing formula 
• Seals instantly 
• Moisture resistant 

Gorilla Sealant Tape seals out:

• Moisture 
• Water 
• Air 

How to apply Gorilla Sealant Tape:

1. Clean and dry the surface
2. Apply the tape at room temperature 
3. Cut the needed size – do not remove the liner yet (the tape size needs to be larger than the repair area)
4. Remove the release liner 
5. Align and press the tape down to the needed area – you cannot reposition it once you apply it 
6. Rub it into the surface firmly 
7. Smooth out the tape, working from the middle toward the edges 
8. Keep pressure on it for at least 2 minutes for the best adhesion – best if you add weights on top of it for 24 hours 

How to store Gorilla Sealant Tape:

• Store at room temperature on the top and bottom disc

Note: Works best on non-porous surfaces. 

Gorilla Liquid Sealants

Gorilla Liquid Sealant features a self-leveling formula that covers smaller cracks and gaps for a watertight seal.

Gorilla Liquid Sealant can be applied by pouring, dipping, or with a brush, roll, or trowel. Whichever you have at hand or is easier for you to use. 

Main features:

• Flexible 
• Rubberized coating 
• Self-leveling 
• UV resistant when dried
• Temperature resistant when dried
• Can be painted after it cures (latex and oil-based paints)
• Stops and prevents leaks 
• Works on both wet and dry surfaces 
• Seals out moisture, water, and air 

Gorilla Liquid Sealant can be used on:

• Concrete
• Metal
• Aluminum 
• Wood 
• Tile 
• Brick 
• Glass
• Fabric 
• Most types of rubber
• Most types of plastic 

How to apply Gorilla Liquid Sealant:

1. Properly clean and dry the surface 
2. Give the sealant a good stir until it is properly mixed 
3. Cover the surface fully with the sealant 
4. If necessary, apply multiple coats of sealant – allow each coat to fully cure before applying another one on top of it 
5. Allow curing for 24 to 48 hours 

Note: Do not use to fill holes that are bigger than ¼”. 

Gorilla Spray Sealant

Gorilla Spray Sealant has an applicator nozzle that features a controlled spray pattern for an even, clean, and easy-to-apply coat. 

Main features:

• Flexible 
• Rubberized coating 
• Self–leveling formula 
• Seals out water, air, and moisture 
• Prevents and stops leaks 
• Paintable after it dries – for oil-based paints use a primer first 
• Uv resistant
• Temperature resistant 
• Only for exterior use

Gorilla Spray Sealant can be used on:

• Wood
• Concrete 
• Metal 
• Brick
• Aluminum 
• Tile
• Most rubbers 
• Others 

How to apply Gorilla Spray Sealant:

1. Clean and dry the surface properly, removing any stains, dirt, or dust
2. Shake the container 
3. Spray onto the surface from an 8” to 10” distance
4. Apply as many coats as necessary to properly fill the gaps, cracks, or holes 
5. Allow the sealant to fully cure between coats 
6. Let the sealant cure for at least 24 hours 

Note: Gorilla Spray Sealant is not recommended for below waterline use. 

Gorilla 100% Silicone

The white and clear color options of Gorilla 100% Silicone give you the ideal sealant option for your project. 

Main features:

• Waterproof 
• Flexible 
• Can be exposed to water after 30 minutes of application 
• Mold resistant 
• Mildew resistant 
• Non-yellowing formula 
• Shrink proof 
• Crack proof 
• Seals out air, water, and moisture 
• All weather hold 
• Indoor and outdoor application 
• Gap filling 

Gorilla 100% Silicone can be used in various places, including:

• Kitchen
• Window 
• Bath
• Doors
• Plumbing 
• Gutters
• Marine 
• Much more 

How to apply Gorilla 100% Silicone:

1. Clean and dry the surface 
2. Apply the sealant to the surface 
3. Smooth the bead right away to cover the surface evenly 
4. Let it cure for 24 hours 

How to store:

• Store away from direct sunlight and any heat sources in a dry and cold place.

Note: Do not apply on a surface that is frozen, wet, damp, or contaminated in any way. Best used in temperatures above 40 degrees Fahrenheit. 

Gorilla Fillers: What They Are and How To Use Them 

Fillers are a great solution to cracks and holes that appear either in your wall or in your furniture. Gorilla fillers make filling holes and crack easy with effective and durable results. 

So let’s discover more about the two types of fillers Gorilla offers. 

Gorilla Wall Repair Filler 

As the name gives it away, this filler is to repair cracks and holes in the walls and on the ceiling. 

Main features:

• Easy to spread lightweight formula 
• Easy to control 
• Very strong
• Durable 
• Doesn’t sag 
• Shrink proof 
• Crack proof 
• The finish doesn’t require sanding 
• Smooth finish 
• Can be painted just as easily as drywall – can be painted after 15 minutes of application 
• Indoor and outdoor application 

How to apply Gorilla Wall Repair Filler :

1. Remove any dust, dirt, oil, or grease stains from the surface 
2. Wait for it to fully dry 
3. Apply the filler to the surface (you can use a putty knife to do so) 
4. Allow the filler to cure for a minimum of 24 hours 

Note: Only apply in temperatures above 40 degrees Fahrenheit. 

Gorilla Wood Filler

Gorilla Wood Filler is a high-performance filler that provides a durable and strong solution for holes, gouges, and cracks on a wood surface. 

Main features:

• Easy to spread formula 
• Smooth 
• Natural finish 
• Anchors nails and screws 
• Stainable 
• Paintable 
• Sandable 
• Gap filling 
• Shrink proof 
• Crack proof 
• Indoor and exterior application

How to apply Gorilla Wood Filler:

1. Clean and dry the surface, and remove dirt, dust, grease, or any oil stains 
2. You can use a putty knife to apply it to the needed surface – remove any excess filler 
3. If you want to sand the filler, wait for it to dry for about 1 – 2 hours for shallow holes and cracks; for bigger ones wait for about 6 hours or more before sanding (you can use medium-grit sandpaper)
4. Allow the filler to cure for at least 24 hours

How to store Gorilla Wood Filler:

• Store in a dry and cool place, away from exposure to sunlight or heat sources. 

Note: do not apply in spots exposed to water. Only apply in temperatures above 40 degrees Fahrenheit.

Conclusion

Gorilla Sealants and Fillers come with as much strength, high performance, and durability as their adhesives. 

The different types of sealants and fillers offer the convenient flexibility of having the right product for various needs. 

Before applying them to any surface, ensure that the surface is properly cleaned and dried. 

You can apply multiple coats, but wait for each coat to fully cure before you apply another one on top of it.